21
Frequency
The optimum frequency of the video signal of the
currently active transfer path is set for fine-tuning
of the video signal between the camera and the
home station.
The setting must be confirmed with
OK
.
If the menu item "Frequency" is ended with
(Back), changed settings are not applied.
i
Selecting camera beforehand
Before the menu item "Frequency" is selected, a
colour camera must be selected. If no camera has
been selected, the cameras available in the sys-
tem are listed for selection.
i
Setting with several home stations and
colour cameras
The frequency setting applies only for the con-
nection from the active home station to the active
colour camera. This means that the frequency for
the transfer path between the home station and
the colour camera must be set individually if sev-
eral home stations and/or colour cameras are
present.
If several cameras are present, the Start-up menu
must be exited to select the next camera, then
the next camera must be switched on with
.
Frequency
14
Back
OK
