Product characteristics
-
Integration into groups or master control via extension units with additional 24 V inserts
-
Operation as a main device or extension unit
-
Supports sensor functions of the cover
-
Several motors can be connected in parallel
-
The direction of rotation of the shutter motor is determined by switching the polarity of the
motor outputs "pole-changing principle" (Figure 2)
Figure 2: Control of the shutter motor
(6) Relay contacts for moving up
(7) Relay contacts for moving down
4 Operation
Moving the blind/shutter
o
Press top or bottom of cover for longer than one second.
The Venetian blind moves in the desired direction to the end position or stops when the
button is pressed again.
Adjusting the slats
o
Press top or bottom of cover for shorter than one second.
The slat position changes in the desired direction for as long as the button is pressed.
Moving the blind/shutter via a mechanical extension
o
Press the button for moving up or down until the blind/shutter has reached the desired
position.
5 Information for electrically skilled persons
5.1 Fitting and electrical connection
Connecting and mounting the insert
Operate the insert only with a DC 24 V SELV power supply unit.
32545312
10499098 I00
17.05.2011
2/8
Blind control system
Blind controller insert DC 24 V
