UM bilancia analitica BL224 ENG rev.0 13.05.2020
26
Totalization
The totalization function allows you to make the sum of several independent piece counting sessions.
The result is expressed in PCS. (Quantity of items)
Max 99 different quantities.
Manual Totalization
Procedura
1.
Make sure you have selected the "
F CHw
" function in the user menu.
2.
Place an empty container on the plate.
3.
Adjust the scale by pressing the <
TARE
> key.
4.
Press the <
UNIT
> key until the word "tot" appears in the display.
Now you need to set a reference quantity.
5.
Press and hold the
▲
key to enter the reference quantity menu.
The last used value can be displayed, editable using the
▲
key.
(5,10,20,50,100 pieces).
6.
Place the corresponding number of elements on the plate, and press the
<
TARE
> key
Once the stability is reached, the balance will have calculated the average
reference weight.
7.
Add the items to be counted on the plate, when the "
" symbol appears,
the scale is ready to add the values.
8.
Press the <
CAL
> key to store the data. The display shows "n-1" indicating
that the first data has been saved.
9.
Proceed by adding additional elements, and pressing <
CAL
> to sum up and
save the data.
•
Press the <
UNIT
> and <
CAL
> keys
simultaneously
to display the total.
AUTO Totalization
Procedure
1.
Make sure you have selected "
F CHw AUTO
" in the user menu.
2.
Place an empty container on the plate.
3.
Adjust the scale by pressing the <
TARE
> key.
4.
Press the <
UNIT
> key until "
tot Auto
" appears on the display.
5.
Repeat steps 5, 6 and 7 as in the manual procedure
6.
When stability is achieved, the data is stored, and "n-1" appears on the
display.
7.
Proceed by adding new samples to count, and wait for stability.
•
Press the <
UNIT
> and <
CAL
> keys
simultaneously
to display the total.
