UM bilancia analitica BL224 ENG rev.0 13.05.2020
22
Accuracy settings
Accuracy does not affect the calculation and conversion in the custom drive, but it
determines the displayed results.
1.
Press <
TARE
> to access the "Acc" section.
2.
Use the
▲
key to scroll through the available accuracy standards
3.
Select the desired accuracy standard by pressing the <
TARE
> key
The
available standards
are:
0.000001, 0.00001, 0.0001, 0.001, 0.01, 0.1, 1, 10, 100, 1000
The stability indicator on the left side of the display indicates which accuracy is
selected.
LSD (Least significant Digit)
1.
1. Press <
TARE
> to access the "LSD" section.
2.
2. Use the
▲
key to scroll through the available accuracy standards
3.
3. Select the desired LSD standard by pressing the <
TARE
> key
The
available standards
are:
1, 2, 5, 10, 20, 50, 100
The stability indicator on the left side of the display indicates which LSD standard is
selected.
Once all three parameters have been set, hold down the <
TARE
> key to save the data
and return to the measurement mode.
Factory default:
Factor = 1,0000
Accuracy = 0,01
LSD = 1
