Oversink and Undersink Water Heater
- 4-
1
GENERAL NOTICE
1.1
Personal responsability
The manufacturer is responsible for the product’s conformity to the relevant CE directives, laws and regulations in force at
the time the product is first brought to market. The Installer is responsible to ensure the Installation Company and / or its
operatives have been trained and hold the appropriate qualifications and are up to date with current regulations and
legislation enforce at the time of installation. This includes compliance with the Water Supply (Water Fittings) Regulations
1999 in England and Wales, Water Byelaws 2000 Scotland, Water Bylaws currently enforce in Ireland. L8 for commercial
buildings and NHS Guidance for all NHS premises. The design of the system, installation, operation and maintenance of
the appliance is the Installer responsibility.
Reference to laws, regulations or technical specifications contained in this manual is purely for information purposes. New
laws introduced or modifications to existing laws are not in any way binding on the manufacturer towards third parties.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use
of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
The appliance is not intended to be connected to the water mains by the use of a hose set.
1.2
Field of use
The electric water heater for the production of hot water is only intended to be used for Domestic Hot Water heating for
residential or light commercial application, without exceeding the usage restrictions specified herein. To this purpose it
must be hydraulically connected to a domestic hot water delivery network. It requires a power supply to operate.
Never use the electric water heater for any purposes other than those specified herein. Any other use is to be deemed as
inappropriate and is not allowed.
The manufacturer cannot be held responsible for any installation errors and inappropriate equipment use.
1.3
Requirement and safety normes
The Installer is responsible for the design and function of the installation. The Manufacturer will not be held responsible or
liable for any damages caused by incorrect or poor installation and/or non-compliance with the instructions contained in
these Installation, End User and Service Instructions, and in particular with those described in the following:
It’s not allow to install the water heater outdoor;
the electrical connection must comply with the provisions specified in the relevant paragraph;
the supplied nylon electrical protectors must be properly installed;
Installation and maintenance must be performed by qualified personnel, and in accordance with the current
regulations and local by-law;
the maintenance regulations must be observed;
the equipment must be installed in an appropriate room (to avoid being exposed to frost);
the maximum overpressure, when using the water heater, must be observed;
the maximum temperature, when using the water heater, must be observed.
CAUTION! FAILURE TO COMPLY WITH THE ABOVE INSTRUCTIONS WILL RESULT IN THE CANCELLATION OF YOUR
WARRANTY.
This equipment complies with the provisions contained in the EEC Directives in force.
1.4
Certifications and markings
The CE marking applied to the appliance certifies that it conforms to the essential requirements of the following European
Directives:
2006/95/EC concerning the safety of electrical equipment;
2004/108/EC concerning electromagnetic compatibility
The manufactory’s ability to produce and supply all products in accordance with the above regulations is guaranteed by
our company quality management system that is certified according to the ISO 9001 2008 standard.
