background image

Oversink and Undersink Water Heater 
 

 

- 2- 

INTRODUCTION 

 

Cod. 

Decription 

176542 

Style 10L 2kW Oversink 

176543 

Style 10L 2kW Undersink 

176544 

Style 15L 2kW Oversink 

176545 

Style 15L 2kW Undersink 

 
The following information incorporates both the installation and servicing instructions and should be left in a safe place 
adjacent to the water heater or given to the end user once the end user has been correctly instructed in the effective 
operation of the water heater. The Installer has a duty of care to instruct the end user how to operate the electric water 
heater correctly, failure to undertake this instruction will result in the cancellation of the warranty.  
 
These instructions include essential and important information for safe and correct installation, and are an integral part of 
the product. As a consequence all technical documents must always accompany the product. 
 
Giona UK is continually developing its product range and therefore reserve the right to change specification without prior 
notice. All the data and instructions contained in this manual are subject to review or product update changes at any time. 
They will be current at time of print. Please contact the manufacture to ensure you have the correct and current manual. 
 
Please always refer to the instructions contained in this manual when installing the equipment. 
The operations described in these instructions require specialized knowledge and therefore it is essential the installer has 
ascertained the appropriate qualifications and competence training prior to installing the product.  You should only install 
this product once you have achieved such technical qualifications.  
The instructions are provided in schematic form only as installations designs may vary. The diagrams used are purely 
INDICATIVE, have no pretense of completeness and are not intended to replace the design. 
 
© 2013 Giona UK reserve the right to change this document at any time.  All rights reserved.  
Giona UK Ltd cannot be held liable for any loss or damage arising from product specifications deviating from the standard 
version. The information contained within this document has been compiled with all possible care, Giona UK Ltd cannot 
be held liable for any installation errors, loss or damage or work performed by third parties.  
 
Subject to change 

 

THIS MANUAL IS TO BE LEFT WITH THE END USER

 

Содержание Style 10L 2kW Oversink























Отзывы: