Gin Yeti Tandem 3, Руководство пользователя

Страница: 37 / 52

a
Yeti Tandem 3 user manual aa
_________________________________________________________________________________________________________________________________ a
a
}
The fl ight and control behaviour of Yeti Tandem 3 37 requires pro fi ciency in the basic fl ight
techniques conveyed in paragliding fl ight training. For the safe execution of thermal fl ights,
pro fi ciency in the basic techniques of active fl ying is required. Pro fi ciency in tandem fl ying is also
required, please check with your national paragliding association on how to obtain the necessary
training and quali
fi cations.
The fl ight- and control behaviour of Yeti Tandem 3 41 requires in addition an effective active
fl ying style with precise and sensitive control inputs.
}
}
The behavior of the Yeti Tandem 3 37 after disturbances poses no exceptional demands on the
currency and reaction speed of the pilot.
However, the pilot must possess the basic active
fl ying skills to control disturbances and
prevent and control collapses.
The safe control of demanding
fl ight manoeuvres, such as steep spirals, B-stall, requires
appropriate practical knowledge. If this does not exist, safety training is recommended.
The behaviour of the Yeti Tandem 3 41 after disturbances poses increased demands on the
currency and reaction speed of the pilot. The pilot should have su
ffi cient practical knowledge to
avoid and control the most common disturbances, especially side and front collapses.
Flight maneuvers, such as a steep spiral or a B-stall, make higher demands on the pilot due to
the overall more demanding handling behaviour. These maneuvers should only be attempted
where the pilot has good practical knowledge.
If the pilot is insu
ffi ciently experienced, a safety training session is recommended.
}
}
All GIN gliders are produced in the company's own facilities using the most modern techniques.
Highly skilled staff take extreme care during the entire manufacturing process. Stringent quality
control is made after each step, and all materials that go into each wing can be traced. These
measures guarantee that pilots
fl y with the assurance that their wing meets the most exacting
safety standards.
Your glider will be delivered to you with the original trim settings which correspond to the
tested con
fi guration. Do not make any modi fi cations, such as changing the risers or altering the
line lengths. This would invalidate the certi fi cation and is potentially dangerous.
}
ǧ
ǧ
ǧ
Page 37
a