11
CAUTION: Make sure that the speed system
is not too short. The front risers of your
paraglider must not be pulled down in normal
(unaccelerated) flight.
Before you fly
Make sure your dealer has checked the harness for completeness and basic settings. Your harness must
be assembled by a suitably qualified paragliding professional, for example, your instructor.
Gin Gliders recommends that assembly be carried out in the following order. If you are in any doubt
whatsoever about this procedure, please seek professional advice from your instructor, GIN dealer or
importer.
Installing the speed system
Assemble the speed system from top to bottom. Pass the cord along the inside of the harness and route
it through both pulleys (1). From the second pulley, route the cord through the metal ring at the bottom
edge of the seat (2). Connect the cord to the speedbar using a secure knot (3). Finish by attaching the
speedbars elastic cord to the foot plate of the cocoon. If flying without cocoon’ remove elastic cord from
the speedbar.
2
1
1
2
3
*See page 22 for speed system
adjustment
3
Содержание Genie Lite 2 L
