Gin Gliders Genie Lite 2 L, Руководство пилота

Страница: 19 / 37

19
WARNING: When installing the reserve make
sure the reserve handle is up and the reserve
lines are facing down.
Rescue installation guide
It is very important to properly install the rescue parachute. If the parachute is not folded correctly or
the lines are not placed properly then a serious if not fatal accident could result. If you have any doubts
speak with your instructor or GIN dealer.
Main rescue installation guide
Begin by first connecting the Y bridle and the rescue handle to the rescue parachute . Install the rescue
into the harness with the handle connection FACING UP and the extra para line neatly folded on the bottom
of the container (1). Be sure that the inner bag is installed so the rescue handle loop is facing the opening
of the rescue container (2)
Using the paracord included with your harness pull the built in loops through the metal rings in the
order shown below. First pull the LYME loop through the eyelet on the rescue container cover “A” (4). Next
close the zipper on the bottom of the container and the zipper for the rescue bridle tunnel (5). Secure the
LYME loop by inserting the ORANGE plastic wire from the rescue handle (make sure to place the ORANGE
plastic wire into the wire cover shown in photo 6). Next pass the RED loop through the second eyelet “B”
and through the eyelet leading into the harness “C”(7). Pass the CLEAR wire through the large eyelet “D”
and from inside the harness, secure the RED loop using the CLEAR wire (make sure to place the CLEAR wire
into the wire cover shown in photo 8)
*Follow the instructions on the next page.
LYME
RED
C D
A
B