Gima PRIMALED, Руководство по эксплуатации, Страница: 9 / 16

Operative Manual
MO079-IT 15/06/12
Rev.0 Pag. 9 di 16
6. Adjustments
6.1 Yearly inspections by the operator
Keep to the yearly inspection schedules and inspect the product according to IEC 62353 standard.
6.2 Repairs
The Product must only be opened and repaired by a technician who has attended a course on the Product organised
by the manufacturer or by a qualified technician in possession of the necessary technical skills.
6.3 Adjustments
The Product is sold already balanced and does not require further adjustment. In the event, In the event of the
Product becoming stiff or loose over time, please contact the service center.
6.4 Troubleshooting
n Problem Solution
1 The Product does not switch on
Check the INPUT and OUTPUT (24V) power supply voltage and
the voltage of the electronic board terminal (24V).
2 The Product does not remain in position See the attached instructions
3 The light flickers Contact the service center
4
The light beam on the operating field is
not focalized
Contact the service center
6.5 Routine maintenance
n Period Job
1 Once a year
Inspect all the lamp joints and make sure they are not hard to move. If Product does not
maintain the position or is hard in movements, see the attached.
2 Once a year
Make sure the retention screws are tightened properly. If these are not properly fastened,
adequately tighten.
3 Once a year
Check the condition of the Product paint. Make sure there are no paint pieces that could
fall on the operating field.
6.6 Spare parts list
Description Order code
Sterilizable handle Z100848
Electronic board Z300640
Electronic card Z300231