Operative Manual
MO079-IT
15/06/12
Rev.0
Pag. 15 di 16
10.
Friction regulation
The device is provided already balanced and no further adjustments are required; however, if over time the
movement of arms around their rotation joints should became too rigid or too soft, so as to not allow the
maintenance in position of the device itself, it is possible to act on the different friction systems in order to
restore the correct balance.
Use the included Allen key to adjust the friction force in correspondence of rotational joints and, therefore, the
consequent movement of movable arms.
ROTATION JOINTS
Depending on the version of the device, there is a different number of joints and so of frictions:
FRICTION ADJUSTING PROCEDURE
In correspondence of the joint of interest,
using the Allen key, act on the regulating
screw on the side of joint.
Rotate clockwise to increase the force of
friction and hence stiffen the movement.
Rotate counter-clockwise to decrease the
friction force and make lighter the movement.
After the adjustment the movement must be
fluid and homogeneous.
Table version
Table version with flexible arm