5
5.2. Underside View and Left View
Figure 3.
Underside View and Left View
1
、
Probe jack : It is used to connect a SpO
2
sensor to measure the oxygen saturation and pulse rate.
2
、
USB port :It is used to connect a personal computer to export the trend data via a data line.
5.3. Battery and probe installation
A.
Refer to Figure 4. and insert the two AA size batteries properly in the right direction.
Figure 4.
Batteries installation
B.
Replace the cover.
C.
Inserting the SpO
2
probe of the pulse oximeter in the upper jack. (The probe is limited to be
produced by our company; never replace it with the similar ones by other manufacturers).
Please take care when you insert the batteries for the improper insertion may damage
the device.
If the alarm function is on, the device will provide high-priority alarm signal when the
