9
On the main menu interface ,press the "up button" or "down button" to select ―Pulse Sound‖, then
Press the "left button" Or "right button" to choose to have the Pulse Sound (heart beat) "on" or "off ".
c) Backlight adjustment
On the main menu interface, press the "up button" or "down button" to select" Brightness", then
press the "left button" or "right button" to change the number in order to adjust the brightness of
screen.
d) Data storage setting
This device has the ability to store 24 hours worth of data. It can store the measured pulse rate and
SpO
2
value accurately, transfer the data to the computer, display the data and print reports (with the
included SpO
2
Software - Green Heart)
a.
On the main menu interface, press the "up button" or "down button" to select "Record", then
press the "left button" or "right button" again to enter the dialog box of figure 10 or finger 11: if it is
not in recording state, will come into figure 10; if it is in recording state, will come into figure 11.
Figure 10.
b.
In the status shown in Figure 10, press "left button" or "right button" can change the setting of the
item, then press "menu button" to exit the status in Figure 10, and perform setting. YES for starting
recording, NO for do not recording.
c.
In the status shown in Figure 11, press "left button" or "right button" can change the setting,
press "menu button" will exit the Figure 11, and perform setting. YES for stopping recording, NO for
continue recording.
Figure 11.
d.
If the data storage function is being turned on, when return to the measuring interface, a red
"REC" sign and a flashing red dot would appear on screen, which means the device is in a state of
storing.
e.
In the state of storing, whatever interface the device is on (measuring interface, menu interface),
the sign "Recording" would appear on the screen in 30 seconds, and then the screen will be
automatically shut down. If pressing any button (power on/off excluded) at this moment, the sign
"Recording" would appear on the screen, and then the screen will be automatically shut down again;
