Gima MT BASE PLUS, Инструкция по эксплуатации

Страница: 36 / 46

MT BASE PLUS
GIMA SpA
36
Manuale d’Istruzioni/Instruction’s Manual
MA321IGBa
DESCRIPTION OF THE UNIT
1 Main socket
2 Main mechanical switch
3 Display frequency “Freq” (Hz)
3a + key to increase
3b – key to decrease
4 Display intensity “Level” (Gauss)
4a + key to increase
4b – key to decrease
5 Display Time “Timer”(min)
5a + key to increase
5b – key to decrease
5c Output start key (Start)
5d Output stop key(Stop)
6 Connector OUT 1
6a Warning light output 1
7 Connector OUT 2
7a Warning light output 2
Output start key (Start)
Output stop key(Stop)
CONTROLS
M
AIN SOCKET
(1)
On the back panel of the unit there is the main socket. Put in this socket the supplied main
cable. The cable must be connected to a main socket with compatible characteristics with the
unit (see the plate’s data on the underside part of the unit).
M
AIN MECHANICAL SWITCH
(2)
At the left of the unit there is the main switch. Putting the switch on I position, the unit switches
on. The switching on of the unit is shown by the lighting of the display.
D
ISPLAY
F
REQUENCY
F
REQ
(3)
On top at right of the unit there is a display for the visualization of the frequency, in Hertz.
Switching on the unit, the frequency is at 75 Hz and can be changed in the steps 10 - 25 - 50 -