28
3.6.1 Time/Date Setting
1.On system setting screen, select “Time/date” with Navigation Key, then press “
OK” button to enter time and date setting screen (date format: dd/mm/yyyy),
as shown in Figure 3-24.
2. Use Navigation Key to adjust the value, and then press “
OK” button to shift
black cursor and adjust another value.
3. When finishing the settings, press “
OK” button to save the setting and
return to the upper level menu screen.
3.6.2 Language Setting
1. On system setting screen, select “Language” to enter language information
screen, as shown in Figure 3-25.
2. Press the Navigation Key to select the language between “Chinese” and
“English”.
3. Press “
OK” button to save setting and return to the upper level menu
screen..
3.6.3 Brightness Setting
1. On system setting screen, select “Brightness” to enter brightness setting screen,
as shown in Figure 3-26.
2. Adjust brightness with Navigation Key; 1~7 level adjustable;
3. Press “
OK” button to save setting and return to the upper level menu screen.
3.6.4 Beeper Setting
1. On system setting screen, select “Beeper” to enter beeper setting screen, as
shown in Figure 3-27.
2. Choose “ON” or “OFF” with Navigation Key to turn on the beeper or turn off
the beeper; the default setting is “ON”.
3. Press “
OK” button to save setting and return to the upper level menu screen.
3.6.5 Measure Mode Setting
1. On system setting screen, select “Measure mode” to enter measure mode setting
screen, as shown in Figure 3-28.
2. Choose “Normal” mode or “Enhanced” mode with Navigation Key. The default
setting is “Normal” mode.
Normal mode: can filter the interference signal in ECG waveform.
Enhanced mode: can better reflect the fidelity of ECG waveform.
3. Press “
OK” button to save setting and return to the upper level menu screen.
ENGLISH
Figure 3-22
Figure 3-21 Upload Data Screen
Figure 3-23
Figure 3-25 Language Setting
Figure 3-26 Brightness Setting
Figure 3-27 Beeper Setting
Figure 3-24 Time/date Setting