Gima 28182, Руководство пользователя

Страница: 23 / 76

23
• The negative pressure is set with keys - and +, which are found below the LCD screen: Press one of the
two keys with the motor on. The level of the negative pressure will flash at the centre of the display.
Release the key and, after 3 seconds, the value will be operating (fixed digit on the display) and saved. The
desired value remains fixed until the operator varies the negative pressure, whilst the bar-graph moves
along the semi-circumference stopping in correspondence (graph) of the value set.
The maximum negative pressure value that can be set is: -75kPa (-0.75 bar)
The minimum negative pressure value that can be set is: -15kPa (-0.15 bar)
• To suspend and / or terminate the treatment press the ON / OFF button and and pull the plug out from the
power socket.
• Unscrew the jar’s lid and fill the jar 1/3 full or ordinary water (this for an easy cleaning operations and an
rapid reaching of the functionally vacuum) then rescrew the lid on the jar correctly.
• To extract the accessories and start with cleaning.
• At the end of each use place the device on its FIXING BRACKET (ref. SECURING THE NEW SUCTION
UNIT)
• The battery is fully charged in about 70 minutes with continuous operation.
WARNING: Before using the device, check the battery power status. Before each use proceed with
charging the battery. To maintain the device in good conditions, recharge the battery every 3 months (when
not in use).
WARNING: The seal hook placed on the SUPPORT is the dividing element from the 12V mains, even
if the device is equipped with the specific ON/OFF button.
The device features an energy saving function which allows the device to increase its autonomy and de-
crease the number of revs of the motor. In order to do so, it controls the negative pressure which is generated
only when the operator suctions body fluids.
If the operator does not carry out the suction process the device lowers the number of revs of the motor, thus
protecting the duration of the internal battery.
Charging operations (through the supplied AC/DC adapter): The internal battery can also be recharged
with the universal power supply by connecting it through the special connector and inserting the power cable
plug into the power socket. Estimated charging time about 6 hours (360 minutes) with the device turned off
(not operating).
ENGLISH
LCD display
“Proximity” sensor
Adjustment button
depression “-”
“Proximity” switch
ON/OFF switch
Adjustment button
depression “+”