ENGLISH
Thank you for purchasing the our product. We hope you will be satisfied with our product
throughout its service life.
Please study the entire operating manual carefully before you start using the product. Keep
the manual in a safe place for future reference. Make sure other people using the product
are familiar with these instructions.
IMPORTANT SAFETY INSTRUCTIONS:
• Make sure you follow the marked polarity of battery when inserting and replacing it.
• If the appliance will be out of use for a longer time, remove the battery.
• Do not leave the unit unattended when in use.
• This appliance is not int ended for use by persons (including children) with reduced phys-
ical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
• Use the product only for the intended purpose specified in the Operating Manual.
• Use the unit only on a stable horizontal surface.
• Before cleaning, assembly, or disassembly of the cover, switch the unit off and remove the
battery!
• Do not use abrasive or chemically aggressive substances for cleaning the unit.
• Do not use the unit if it does not operate properly, or if it has been dropped, damaged or
exposed to any liquids. Take the unit to an authorized service center fortesting and repair.
• The unit is suit able for domestic use only. It is not designed for commercial operation.
• Keep the unit away from heat sources, such as radiators, ovens etc. Do not expose the
unit to direct sunlight or moisture.
• Do not touch the unit with wet or damp hands.
• The product is a fragile measuring device. Prevent it from crashing or falling.
• Do not repair the appliance yourself. Contact an authorized service center.
FAILURE TO FOLLOW THE MANUFACTURER’ S INSTRUCTIONS MAY LEAO TO RE-
FUSAL OF WARRANTY REPAIR!
TECHNICAL SPECIFICATION
• Automatic hold function
• Precision measuring system
• Weight difference display function
• Tare function
• Low battery indicator (“Lo”)
• Auto power off
Technical parameters
Voltage
2 pcs 3V CR2032 lithium batteries
Weighing range
20 kg
Weighing increments
10g
Weighing units
Kg, Lb, St
Working /Storage temperature
20-25°C /15-40°C
Display size
LCD diameter = 8,0cm,3,15 inch
PRODUCT DESCRIPTION
1 Weighing surface (tray)
2. ON/OFF button
3. TARE button
4. Kg/Lb/St button
5. Display
OPERATING BUTTON
• The scale can be switched on and off with the ON/OFF button (Push the button once.)
• With the TARE button you can use the tare function. “0.00” appears on the display 2 sec-
onds after pressing the button.
• Kg, Lb, St button is suitable to choose the required unit of measurement, the actual unit of
measurement can be seen on the right side of the display.
USING THE SCALE
1 These scales run on 2pcs of replaceable lithium batteries.
Remove the protective film before use (Fig. 1).
2. Before weighing a pets screw the tray to the measuring
surface so the tray would stand stable.
Fig. 1
Fig. 2
3. By pressing the ON/OFF button once “0.00” appears on
the display (Fig.2).
4. Place the pets on the scale. The measured weight is going
to be displayed in a few seconds, and stored in the mem-
ory automatically. An “M” is displayed indicating the pres-
ence of data in the memory. After the next weighing the
screen displays the measured weight and the difference
between the measured weight and the previous weight by
turns of 2 seconds.
The lastly measured weight is automatically stored in the memory in case of both manual
and automatic switching off.
5. By pressing the ON/OFF button once, the scale switches off. By not using the scale for 30
seconds it switches off automatically.
MEMORY FUNCTION
After switching on the scale, an “M” is dispalyed which means that the last measured weight
is stored in the memory, so that the weigh difference could be displayed. If you do not need
the displaying of weight difference, pressing the ON/OFF button quickly twice erases the
data from the memory. At this time the “M” disappears from the display. Removal of battery
erases the memory too.
ABOUT TARING
If you use not only the tray and the added weight (blanket, pillow etc.) is lighter than 5 kg,
after pressing the TARE button the screen displays “0.00” and the maximal measurable
weight will be 20 kg. If the added weight is heavier than 5 kg, after pressing the TARE button
the screen displays “0.00”
but the maximal measurable weight will be less than 20 kg (more precisely: 20 kg minus
the added weight).
OTHER INFORMATION ON THE DISPLAY
If the “Lo” warning is displayed after switching on (Fig. 3), or
there is nothing on the display, the battery is dead and has
to be replaced.
If the sign “ERR” appears on the display (Fig. 4.), it means
that the scale is overloaded, in this case the weight must be
reduced (an overload can cause sensor faults).
If the message ”OUT2” appears on the display (Fig. 5.), it
means sensor fault (after overloading or after a sudden, big
dinamic load ). In this case, we have no warranty liability for
the product.
CLEANING AND MAINTENANCE
The surface of the unit may only be cleaned using a wet
cloth. Do not use any detergents or hard objects as they may
damage the unit’s surface!
Never clean the unit under running water, do not rinse it, and do not submerge it in
water!
REPAIR AND MAINTENANCE
Any extensive maintenance or repair that requires access to the inner parts of the product
must be performed by an expert service centre
ENVIRONMENTAL PROTECTION
• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene bags shall be handed over for recycling.
Disposal
: The product must not be disposed of along with other domestic waste.
The users must dispose of this equipment by bringing it to a specific recycling point
for electric and electronic equipment.
GIMA WARRANTY CONDITIONS
The Gima 12-month standard B2B warranty applies.
Fig. 3
Fig. 4
Fig. 5
M27261-M-Rev
.0.02.20
Importato da / Imported by:
Gima S.p.A. Via Marconi, 1 - 20060 Gessate (MI) Italy
[email protected] - [email protected]
www.gimaitaly.com
Made in Hungary
27261
Simboli - Symbols
IT Codice prodotto
GB Product code
IT Numero di lotto
GB Lot number
IT Leggere le istruzioni per lʼuso
GB Consult instructions for use
IT Conservare in luogo fresco ed asciutto
GB Keep in a cool, dry place
IT Conservare al riparo dalla luce solare
GB Keep away from sunlight
IT Smaltimento RAEE
GB WEEE disposal
IT Prodotto conforme alla Direttiva Europea
GB Product complies with European Directive
IT Attenzione: Leggere e seguire attentamente
le istruzioni (avvertenze) per l’uso
GB Caution: read instructions (warnings) carefully
IT Data di fabbricazione
GB Date of manufacture
