Gilson Power Carrousel, Руководство пользователя

Страница: 5 / 8

G
E
T
T
IN
G
S
TART
E
D
5
POWER CARROUSEL
TM
|
USER’S GUIDE
Chapter 3
GETTING STARTED
Installation of POWER CARROUSEL
1. Place POWER CARROUSEL on the bench.
2. Connect the AC adaptor to a suitable AC power supply. The cable is stored on the
bottom side of the carrousel and can be unrolled and rolled as required (see Figure 1).
3. The carrousel is ready to charge PIPETMAN M pipettes.
Battery Charging of PIPETMAN M and PIPETMAN M
Connected by Using POWER CARROUSEL
1. First install POWER CARROUSEL as described above.
2. Remove the plug (refer to Figure 3). Now place your
pipette on the charging position (refer to Figure 4),
please ensure that the pipette is properly fitted to
the contacts on the top of the carrousel (a proper
fitting will trigger a beep sound).
3. The pipette will start charging. PIPETMAN M and
PIPETMAN M Connected charges 80% of its full battery
capacity in less than an hour, it takes three hours
to fully charge the battery (for further information
on PIPETMAN M or PIPETMAN M Connected power
management please refer to PIPETMAN M and
PIPETMAN M Connected User’s Guides located on
www.gilson.com ).
Figure 3
PIPETMAN® M and
PIPETMAN® M Connected plug
Figure 4
Charging position
Make sure that POWER CARROUSEL
is well positioned on the bench.
Do not use POWER CARROUSEL
on an unbalanced surface or with
inaccurately rolled cable.
NOTE
It’s recommended to properly balance
the pipettes on the carrousel to
guarantee perfect stability
(refer to Figure 2).
Figure 2
POWER CARROUSEL TM
Figure 1
POWER CARROUSEL
TM
bottom side
WARNING
Do not use POWER CARROUSEL in a potentially explosive environment or with
potentially explosive chemicals
.