Gilson Power Carrousel, Руководство пользователя

Страница: 4 / 8

SA
F
E
T
Y
4
SAFETy
|
POWER CARROUSEL TM
Safety at Work
In addition to any safety precautions listed here, all other relevant safety aspects –e.g., GLP,
GMP, professional trade associations, Department of Health, trade supervisory authorities –
must be observed.
Electrical Specifications
POWER CARROUSEL is supplied with an AC adaptor that is suitable for your country.
you must only use an original Gilson AC adaptor specific to this product.
POWER CARROUSEL is used to recharge Gilson PIPETMAN M and PIPETMAN M Connected
pipettes with a battery specified by Gilson. Use AC adaptor and stand adapter indoors.
AC Adaptor
Input voltage, country-specific: 100–240 V, 50/60 Hz (0.6A max.)
Output voltage: +5 V DC; 3A (15W max.)
Class II: this device is double insulated.
Gilson will not take any responsibility if a non-specified AC adaptor is used.
The look of the reel at the bottom of the carrousel stand is due to an anti-corrosion
treatment (refer to Figure 1).
Use POWER CARROUSEL only with original Gilson’s PIPETMAN M and PIPETMAN M Connected.
If the equipment is used in a manner not specified by Gilson in the user’s guide, the
protection provided in the equipment may be impaired.
Changes in Configuration/Design by User
No changes may be made to POWER CARROUSEL. Any parts that become defective must
be replaced by original Gilson parts.
POWER CARROUSEL may not be altered in design or in any of their safety aspects without
the express written permission of Gilson. In particular, no alterations may be made to any
of the protective functions. Any alteration releases Gilson from any liability for damage
caused.
POWER CARROUSEL is not protected against liquids.
Do not immerse POWER CARROUSEL; liquid inside can damage its internal
components.
Do not allow the liquid to enter the body of POWER CARROUSEL.
WARNING
Do not use POWER CARROUSEL in a potentially explosive environment or with
potentially explosive chemicals
.
Do not position pipettes on POWER CARROUSEL if they can touch each other,
this may create contamination on the pipettes.