O
PE
R
A
TIO
N
10
OPERATION
|
DISPENSMAN
®
Dispensing
To avoid personal injury from
chemicals, wear eye protection
and protective clothing and use
appropriate safety equipment.
Follow safety and operation
instructions in this manual.
Raise the outer housing until it reaches a hard
stop at the set volume. The set volume will be
dispensed into the collecting vessel by pressing
down the outer housing to the lowest point. The
movements should be smooth and constant to
achieve an accurate dispense volume.
Noise while aspirating or dispensing is acceptable
as it is because of the high quality suction valve
with valve ball.
Anti-Drop System
Turn the nozzle switch
7
to “Empty” (180°). The
liquid from the discharge tube will now rinse back
into the bottle. Any further dispensing of liquid is
not possible in this position.
Turn the nozzle switch
7
to “Recycle” (90°) to
seal the dispenser.
Dispense
(0°)
Empty
(180°)
3
3
7
CAUTION
LT801577_D _UG DISPENSMAN.indd 10
09/11/2017 15:01:14
