1. Plug the power plug into the socket, a “Beep” sound is heard. All of the indicator lights will be flashed
for one time and then off. It means that the cooker is well connected with power.
2. Press the “On/off ” key in the control area of the corresponding burner one time, the related display
shows “- -”. It means that the cooker in under standby mode.
3. Power Setting:
★
Induction Zone:
Power
600
1
2
3
4
5
6
7
8
b
800
1000
1100
1300
1400
1600
2000
2800
Please see the details in the following sheet.
★
Ceramic Zone
：
6
7
●
Press “+” or “-” key when the unit is on standby mode, the LED display will show “5” it means the
defaulted power level is 5. User can press “+” or “-” key to adjust the desired power level. There are
8 power levels in total from 1 to 8.
●
Press “Boost” key once and the LED display will show “b”, it means the unit is working at maximum
power 2800W.
NOTE: After cooking, press “On/Off” key to switch off the burner. The hot indicator will light up
if the glass plate is over 60℃ to remind that the cooking plate is too hot to touch.
♢
The best choice for induction cooker is strong-magnetic cookware. Please use the
strong-magnetic cookware which diameter is same as the cooking zone size.
♢
The below cookwares are not recommended to be long used on induction cooker. These
cookwares are suitable for induction cooker, but they will shorten the life time of
induction cooker under long-term using.
1.Aluminum with ferromagnetic base
2.Material #304 stainless cookwares ( this material is with low magnetic)
3.Material #201/#202 etc non-magnetic cookwares ( this material is with low magnetic).
The normal noise from induction cooker during heating
The heating way of induction cooker--the electromagnetism heat on the cookware bottom
directly. According with the structure of different cookwares, induction cooker would cause
below specific noise or vibration. It’s normal presentation, not defective.
1. A low hum, similar to the transformer’s sound.
Such noise would happen when you cook with high-level power. It comes from the energy
which is transformed from the induction cooker to the cookware. This noise would be
disapeared or reduced if the power is decreased.
2. Low whistle
Such noise would happen when there is an empty cookware on the heating zone. It would
disappear if there is food or water added into the cookware.
3. Fizz
Such noise would happen if the cookware has different-material layers. It comes from the
vibration between the different materials. The volume of such noise caused by cookware
would be different because of different food quantity or cooking method.
4. Sharp whistle
Such noise would happen if the cookware has different-material layers, especially when
heating cookware with high-level power. This noise would be disapeared or reduced if the
power is decreased.
5. Noise from cooling fan
Induction cooker must work under controlled temperature to make sure the electronic system
run well. Then there is cooking fan set in the induction cooker, it will keep running during
heating. After turning off the induction cooker, the cooling fan would keep running a few
minutes if the detected temperature is higher than 60℃.
♢
Below material of cookware bottom is recommended:
- Cast iron;
- Enamelled coating with steel material;
- Stainless steel material and suitable for induction cooker;
♢
Please use magnet to check the cookware whether the bottom is strong magnetic or not.
