Gill Instruments Limited
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetStream 105
Page 40
Issue 1
Doc. No. 1955-PS-001
April 2014
6.5.4
Date and Time
When MetStream is first powered up it opens with a default Time Zone, default
01/01/2000 date and zero hour time.
Select the required Time Zone from the drop down menu and click on ‘Save Time Zone’.
Type in the required Time and Date into the relevant boxes and click on ‘Save Time &
Date’.
Default ‘Change Time Source’ setting is NTP (see Notes below).
If PTP enabled (see Notes below) the screen will show:-
Notes:
Manual
Time, for non-networked units, relies on MetStream internal clock.
Network Time Protocol
(NTP) recommended setting for network connected PC’s which
can obtain time synchronisation over the internet.
Precision Time Protocol
(PTP) looks for the network provider master clock for specific
closed networks.
PTP options data will show the IP address of the PTP source.
