Gill Instruments Limited
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetStream 105
Page 16
Issue 1
Doc. No. 1955-PS-001
April 2014
5.2.3
Mechanical installation
Before installing, a bench system test is recommended.
All the time the MetStream 105 is not in its final location, it should be
protected from damage by keeping it in the original packaging as long as
possible.
Location
It is advised to not site the MetStream 105 in close proximity of electrical noise, Radar or
RF transmitters. A site survey may be required if there is any doubt about the strength of
external electrical noise.
Orientation
The unit may be mounted in any orientation.
Dimensions are in mm
