Gill Instruments Limited
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetStream 100
Page 46
Issue 2
Doc. No. 1955-PS-001
March 2016
Thru Mode TCP Port
If the MetStream is placed into Thru Mode, the TCP Port is by default set to 8023. This
can be changed here if a different port is required. For further information on Thru Mode,
please see section 6.5.11.
Hostname
It is possible to change the MetStream hostname from its default here.
Web Server Port
It is possible to change the web server port, which by default is set to 80. This is useful in
instances where the MetStream is being port forwarded. For further information on port
forwarding, please see section 6.5.12.
Please note:
when this port is changed, it will no longer be possible to connect to the
MetStream homepage by typing in the IP address alone. The full IP address and the port
number will need to be entered into the web browsers address bar, for example:
192.168.1.100:1234
Please note:
If the web server port is changed from its default setting of 80, it will no
longer be possible to connect to the MetStream using MScan.
