Gill Instruments Limited
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetStream 100
Page 23
Issue 2
Doc. No. 1955-PS-001
March 2016
Accessing the MetStream GUI using a PC and a Wi-Fi Router
6.2
Note:- Alternative Wi-Fi connected devices may be used to connect to the MetStream unit
to view the GUI if required e.g. Tablet or Smart Phone however the Gill MScan Software
will only run on a PC to determine the IP address. Alternative IP Scan app software will
be needed.
Connect MetStream to a Wi-Fi Router using the 2 metre Ethernet Cable supplied or any
standard non crossover Ethernet cable.
On first applying power to the MetStream 100, wait for 90 seconds before attempting to
access it for data.
If not already connected to the WI Fi Router on the PC select:-
Start/
Select/
Control Panel/
Network and Sharing Center/
Select the appropriate Wi Fi Network and log on to the Wi Fi Network (the Wi Fi
password may be needed).
