Gill Instruments 1561-PK-020 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 69

background image

WindMaster and WindMaster Pro

1561-PS-0001.

Issue 11 February 2017

________________________________________________________________________________________________________________________

12

5.4.

Accessories

Item

Part No

Travelling case - Portable protective case (WindMaster not for part 1590-PK-
050)

1210 – 30 - 074

Travelling case - Portable protective case (WindMaster Pro)

1561 - 00 - 028

31 way Clipper connector

1561 - PK - 050

15m, 9 Pair, twisted pair screened, 22AWG lead - one end free, other end
fitted with Clipper pins

1561 - 10 - 018

Power Supply and Interface Unit (PCI)

1189 - PK - 021

Pipe Mount Adaptor ,1.5”/48.3mm (not part of WindMaster 1590-PK-050)

1561 - PK - 026

Pipe Mount Adaptor with Interface box for 1.32”/33.4mm pipe.

1590 - PK - 048

5.5.

Packaging

Whilst the WindMaster is being moved to its installation site, the unit should be kept in its packaging. All the packaging
should be retained for use if the unit has to be returned at any time.

Note that if the WindMaster is to be regularly moved around, a travelling case is available as an optional extra.

5.6.

Installation requirements

PC requirement

W

IND

and

W

IND

V

IEW

software will operate with any PC with Windows software up to at least Windows 8

versions.

The PC must be fitted with a suitable interface to match the chosen communication format - RS232, RS422, or
RS485 point to point. Alternatively a Gill Power Supply and Interface (PCI) may be used to convert RS422/485
output to RS232.

Other equipment

Analogue inputs / outputs must be compatible with the options fitted to the WindMaster or WindMaster Pro.

See Sections 8 and 9.

Connection

o

The WindMaster/Pro unit is fitted a 31 way Clipper industrial plastic socket and supplied with a modified
mating plug (shell size 3) with solder bucket pins (separate 31 way plug not needed/supplied with WindMaster
part 1590-PK-020).

o

The cable should be securely fixed with cable clamps or equivalent, so that the cable is not under stress at the
plug.

o

There are restrictions on the maximum cable lengths for correct operation.

See 6.4.

o

The cable should be routed up the inside of the mounting tube.

o

See 6.3 for cable specification.

Power supply

o

The WindMaster requires a DC supply of between 9 – 30 V DC.

o

Typical current drain 55 mA @ 12 V (excluding analogue outputs).

o

Allow up to a further 80mA maximum if four 4-20mA analogue connections are used.

«
...
10
11
12
13
14
...
»

Содержание 1561-PK-020






































































Отзывы:

Нет отзывов

Похожие инструкции для 1561-PK-020

Бренд: TaiDoc Страницы: 31

Бренд: Bacharach Страницы: 87

SXNP10 - DIGITAL PIANO

Бренд: Panasonic Страницы: 63

Бренд: LaserLine Страницы: 24

Бренд: Datavideo Страницы: 26

Бренд: Datcon Страницы: 84

Бренд: E Instruments Страницы: 2

Бренд: Van Walt Страницы: 12

Бренд: Hammond Страницы: 78

Бренд: HANSA-FLEX Страницы: 23

Бренд: E-Mon Страницы: 72

Бренд: DeltaOHM Страницы: 26

Бренд: Trotec Страницы: 14

Бренд: IDT Страницы: 20

Бренд: T&D Страницы: 31

Sonic-Pro S6A Series

Бренд: Blue-White industries Страницы: 2

Бренд: FMT Swiss AG Страницы: 24

Solar Auxiliary Power Unit

Бренд: J-TECH Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды