INSTALLATION
Note:
The comfortable cushion caters for newborn, and it also can be removed
for a li le bigger child use.
This child seat can be used with the harness for children less than 13kg in weight
(group 0+), installed rearward-facing using ISOFIX anchorage.
Step 1:
Place the ISOFIX base in car
seat. Li the ISOFIX adjuster bu on
up, the ISOFIX a achment of both
sides will stretch out. Latch both of
the ISOFIX a achments with the
c o r r e s p o n d i n g I S O F I X l o w e r
anchorages completely. Make sure
the ISOFIX latching indica on shows
GREEN. Adjust the support leg to
touch the ground completely.
Step 2:
Place your child into the child
seat. Check the height of the
shoulder straps on the correct
posi on and fasten the buckle. Check
that the harness has not become
twisted and also check that the cover
is not impeding the movement or fit
of the harness in any way. Then
adjust the handle to the posi on 3
for carrying.
Step 3:
Secure the child seat on the ISOFIX
base rearward-facing. Meanwhile check to
make sure the child seat is securely latched
with the ISOFIX base and the child seat
latching indica on shows GREEN. Then push
the child seat towards the car seat backrest
un l it is firmly pressed against the car seat
backrest. Adjust the handle to the posi on 4.
8
