USAGE
1. Install posi on of the child seat in vehicle
Correct fi ng/suitable
Incorrect fi ng/not suitable
Step1
Step2
Step3
ISOFIX low
anchorage
This child seat is suitable for fixing into the
seat posi ons of the cars equipped ISOFIX
low anchorage that are fi ed in accordance
w i t h E u r o p e a n s t a n d a r d ( E C E 4 4 o r
equivalent standard).
Important:
The child seat must only be installed using
ISOFIX anchorage.
Only use on this seat if ISOFIX low
anchorages are equipped
2. Usage of buckle
Firstly, adjust the shoulder straps height as follows:
Step1.
Put the two metal sec ons of the buckle connector
together.
Step2.
Slot the two buckle connectors into the slot in the buckle
un l they “click” place.
Step3.
Check the harness is correctly locked by pulling the
shoulder straps upwards.
To release the harness, you can press the red bu on of the
buckle downwards, the two metal sec ons will be pop up.
WARNING:
DO NOT place rear-facing child seat on front
seat with airbag. DEATH OR SERIOUS INJURY can occur.
3
