GILES GBF-2-GVH Series, Руководство по эксплуатации и обслуживанию

Страница: 89 / 140

77
Operation GBF-2-GVH Ventless Fryer
12. After the vat has refilled, return Pump Switch
⑧
to the [OFF] position.
13. Place the Oil Return Valve Handle
⑩
of the unit being filtered in the [CLOSE] position (vertical) .
14. Confirm that the cook vat just filtered has maintained the proper shortening
fill level ... add if needed.
15. After refilling vat, remove Filter Pan from unit (see Step 3) . Taking care not damage or puncture the filter
media, use the supplied Crumb Shovel
⑪
to clean filter sediment from the media surface and dispose. It is
not essential that filter media be refreshed after each filtering cycle, but it is recommended that the Filter Pan
be cleaned and media refreshed at least DAILY (see Section 6.02, Refreshing Filter Media) .
16. Reinstall Filter Pan under unit (see Step 6) .
17. To continue cooking, see Section 5.03, Cooking Procedure .
To discontinue cooking, see Section 5.06, Normal Shut-Down .
10
11
Always wear thermal protection, such as oven mitts, when performing the
following step. Parts can be very hot!
Both Oil Return Valves must remain in the [CLOSE] position at all times,
except when performing a filtering procedure. Failure to do so can allow
oil to siphon back to the Filter Pan and cause a low oil condition in the
cooking vat.
5.04 Filtering Used Cooking Oil - continued