GILES GBF-2-GVH Series Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 140

GILES GBF-2-GVH Series Скачать руководство пользователя страница 101

89

Cleaning & Maintenance

GBF-2-GVH Ventless Fryer

1.   Confirm that the fire hazard potential has not changed.
2.   Inspect suppressant storage tank for fill level and charge pressure.
3.   Inspect and test the release mechanism.
4.   Check all nozzles to ensure they are free of grease build-up.  Confirm that all nozzle blow-off aps are in place

and in good condition; replace as needed. See

Section 2.06.4, Fire Extinguisher Nozzle Locations

.

5.   Inspect and test the remote manual activation station for function and wear.
6.   Install test link and cut to test automatic actuation.
7.   Inspect and clean fusible links.  Confirm that fusible links are of the correct temperature rating.  See

Section 2-

06.3, Fire Suppression Fusible Link Specifications & Location

.

8. Inspect fusible link conduit and wire cable for wear at pulleys and detectors; replace if necessary.
9. Record maintenance date and service performed in a permanent file, and sign-off on tag attached to system in

a conspicuous location.

Service and inspection of the fire suppression system must be performed by qualified and Ansul® Distributor/Dealer. As

a minimum, field inspection of the fire suppression system must be conducted semi-annually (every 6 months). Such

maintenance shall consist of the following:

The annual inspection and maintenance is the same as the semi-annual inspection except that all fusible links must

be replaced with new links. See

S

ection 2-06.3, Fire Suppression Fusible Link Specifications & Location.

Same as annual inspection and maintenance except for the following:
1. Replace wet-chemical fire suppressant.
2. Hydrostatic test and certify Suppressant Tank and Compressed Gas Charging Cartridge. As alternative

components can be replaced with new.

3. Flow test the regulator.

6.06.1

Semi-Annual (6-Mo) Fire Suppression System Inspection & Maintenance

6.06.2

Annual (12-Mo) Fire Suppression System Inspection & Maintenance

6.06.3

12-Year Fire Suppression System Inspection & Maintenance

«
...
99
100
101
102
103
...
»

Содержание GBF-2-GVH Series













































































































































Отзывы:

Нет отзывов