Installing Mat Reader Assembly
Page 8
MDE-4017G Mat Reader Assembly Kit (C00016-XXX) Installation Manual · April 2017
Interface Box
For optimum mat reader performance, the interface box should be positioned as close to the
mat reader as is conveniently possible. If necessary, the Work Area Cable (Q13850-06) may be
replaced for a longer version to properly place the interface box and still reach the POS
connection. The dash number, such as -06, indicates 6 feet (1.8 meters) long.
Countertop Material
If the countertop material is stainless steel, Formica
®
covered steel, or some other metallic
material, less than the desired performance will be experienced. In the preferred setup, the
countertop should be Corian
®
, plastic, wood, or some other non-metallic and/or non-ferrous
material.
Installing C00016-010 Kit - Low Frequency (Mini Mat)
To install the C00016-010 Kit - Low Frequency (Mini Mat), proceed as follows:
Setting Baud Rate
To set the baud rate, proceed as follows:
1
Remove the Mat Reader Interface Box (M01814A001) cover to access the Logic Board
(M01803A001), as shown in
.
Figure 1: Mat Reader Interface Box
Cover Screw
Cover
Logic Board (M01803A001)
