GiiNii
8” Digital Picture Frame GN-801W
37
Device will not
power on
1 Hold the power button down for 2 seconds.
2. Make sure the power adapter is connected properly on
the device and at the electrical wall socket.
3. Unplug the power adapter from the device, wait 5
seconds, plug the adapter back in and press the power
button.
Nothing happens
when I insert a
Memory Card
1 This device supports following memory cards: SD, SDHC,
MMC, MMC+, MS, MS Duo and xD.
2 Make sure that the photos are in a support format.
Please refer to the “product Specifications” section for
supported file formats.
6. Regulation & Compliance
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment can generate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
