86
Configuring phone settings via the Web configurator
en / en / A31008-M2218-L101-3-7619 / web_configurator.fm / 20.03.2012
V
e
rsion 2, 27.0
5
.2010
Settings for ringer
For each connection, you can define the ring tone.
¤
Open the
Advanced Settings
area.
¤
Select a
Melody
.
¤
Click on
Test
to play back the selected melody.
Saving settings
¤
Click on
Save
to save your settings for the connection.
Deleting a connection
¤
Click on
Delete connection
to delete the displayed connection.
Audio (Voice quality)
Only available in administrator mode.
The voice quality of your VoIP calls is determined by the codec used for the transmission.
To increase the quality, more data must be transmitted. Depending on the bandwidth of
your Internet connection, this can then lead to problems with the volume of data – espe-
cially if two VoIP calls are made simultaneously – so that the transmission no longer takes
place smoothly. The following settings allow you to adjust your Gigaset to your individual
Internet connection.
Settings
¢
Telephony
¢
Audio
You can set the following parameters for the voice quality:
Packed time for RTP packages
¤
Select the interval for sending RTP packets (20 or 30 ms).
RTP (Real-time Transport Protocol) is a protocol for the continuous transmission of
audiovisual data (streams) via IP-based networks.