Gigaset 1054isdn Скачать руководство пользователя страница 167

Страница: 167 / 191

1054I-09.FM

163

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619

10.06.1999

Multicell System

Comfort Mobile Unit

When you operate multiple base station, then you can define on which base station you want to

operate your mobile phones. You have the choice between automatic, manual, or combined. The

setting is made when the mobile unit is not active.

1. Automatic selection of the base station (default setting)

The mobile unit will select the base station for operation itself

●

when it enters the base station’s range

●

when base stations are “competing“ (in the overlap area) to the base station that it sees

as the best.

2. Manual selection of the base station:

You can define the base station to use when making a call; this is recommended for areas of

overlap.

3. Combined selection of the base station:

The mobile unit will search for the base station that you have set for 30 seconds. If it cannot

find it then it will look for the base station that offers the best connection.

The comfort mobile unit is in the non-active

mode.

Press the F key;

Main menu is displayed.

Scroll the main menu with NEXT and select

“Search station“ with OK.

The menu for setting the station is displayed

(complete menu left).

A multiple registration on up to 4 base sta-

tions is possible

You can use NEXT / OK to select the follow-

ing options:

With OK you can select, for example, Sta-

tion 1; in this way you select the base

man-

ually

After this you have the following setup

options:

Press this to confirm the manual selection

of the base station.

Press this to set the

combined selection

function

The station selected with the

combined function is marked with a „*“.

Press OK to select the „Best Station“; so

that the

automatic selection function

Note:

●

Only registrated mobile phones can be operated on a base station.

●

If contact to a base station is lost during the search for another base station, the text

“Srch.station“ appears in the display.

●

You are always available using the base station on which your mobile unit is registrated.

Base Station Select Automatic / Manual / Combined

Phone book

Redial

Telephone lock

Station 1

Station 2

Station 3

Station 4

Best Station

- - - - - -

Search station

Best Station

Station 1

Station 2

Best Station

Autom. Search

when Station 1

is not available

Содержание 1054isdn
































































































































































































Результаты поиска

Содержание 1054isdn

Отзывы:

Похожие инструкции для 1054isdn

Бренды по названию

Популярные бренды

Gigaset 1054isdn, Инструкция пользователя

Результаты поиска

Содержание 1054isdn

Отзывы:

Похожие инструкции для 1054isdn

Бренды по названию

Популярные бренды