134
1054I-7A.FM
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
10.06.1999
Operating the Comfort Mobile Unit
System Settings
You can define which types of devices can be served on the subscriber connections in the sys-
tem.
Cordless devices (internal subscriber numbers 1 to 8) are either mobile units or cordless TAE
connections like Gigaset 1000TAE that allow, for example, the connection for telephones and fax
machines cordless to Gigaset 1054isdn. “Mobile unit“ is the default setting for these devices.
For the cord connected devices (internal subscriber numbers 0 and 9) the devices”type „tele-
phone“ is the default setting. Modems or fax machines should be connected to 0, and a door
opener can only be connected to connection 9.
1. In the non-active mode press the
ß
key and select “Service“ from the main menu.
2. In the service menu select “System settings.“ and enter the system code (default setting
0000) (see also page 133).
After entering the correct system code the
following menu is displayed:
Scroll the menu with NEXT...
until “Equipment data“ is in the 1st line und
then select with OK.
Scroll the menu with NEXT...
until “a/b line”is in the 1st line and then
select with OK.
Set cord connected subscriber connection (a/b connection):
Scroll the menu with NEXT and select one
of the two accessory device connections
and select with OK; here “a/b connection 0“.
The menu for selecting the device type is
displayed (complete menu left).
Use NEXT to select the device type and
confirm with STORE; here “FAX“.
Neutral means fax and telephone
Set cordless subscriber connection:
Scroll the menu with NEXT...
until, for example, “Internal 1“ is in the 1st
line and then select with OK.
The menu for selecting the device type is
displayed (complete menu left).
Use NEXT to select a device type and con-
firm with STORE; here “Fax“
(FAX refers to a fax machine connected via a
Gigaset 1000TAE)
Neutral means fax and telephone
Setting the Connection Configuration for Internal Subscribers
Duration/Units
OK
Call barring
NEXT
Change Sys.Code
Equipment data
a/b line
a/b-connect. 0
Autom.seizure
Call pickup
OK
Access rights
NEXT
a/b-connect. 0
a/b-connect. 9
OK
Internal 1
NEXT
active:Telephone
new
new
- - - - - - - -
new
new
:Modem
:Fax
:neutral
:no funct.
new :Fax
:neutral
new :no funct.
new
SAVE
NEXT
Internal 1
a/b-connect. 0
a/b-connect. 9
OK
Internal 1
NEXT
new
SAVE
:FAX
new :Telephone
- - - - - - - -
NEXT
active:Mobileset
new
new
- - - - - - - -
new
new
:neutral
:Modem
:Fax
:Telephone