Guidelines / Manual
BTS256-LED Tester / Page 14
Software for Remote Control Measurements and Documentation ( Continued )
Version 01.2009-01
1. When the device set-up is finished
the configuration window should be
closed.
2. Open the CW measurement window
Measurement window:
1. starts the measurement
2. stops the measurement
3. displays the measurement time
4. opens CRI display window
5. flux value in lm
6. xy chromaticity values
7. color temperature in K
8. diode array signal level. 100%
indicates saturation.
9. a(Z) correction factor
10. dominant wavelength
11. wavelength of peak intensity
12. peak intensity
Information window displays measure-
ment set-up conditions
Measurement window after measure-
ment is stopped with activated CRI
window.
Please note that CRI measurements
require a 1nm spectral bandwidth
set-up for the diode array
:
1. selects numerical display
2. selects graphical display
3. stops the measurement
4. reset button
5. start data storage
6. clear displays
7. starts protocol printout
1
2
1
2
3
4
1
2
4
5
3
6
7
5
6
7
6
9
8
10
11
12
