Gigafast EE2400-G, Руководство пользователя

Страница: 27 / 30

Link/Act LED giving a solid red light at 10Mbps, green light at 100Mbps
which is a dual color light, indicates that a data link has been established
between the corresponding port and the device. If the connection is faulty, it
will be off. While the port is transmitting or receiving data, you will see a
blinking red/green light. If you’ve make a connection but the Link/Act LED
does not light up as expected, you should check whether the RJ-45
connectors are damaged, or the cable type or pin-out is not correct, or the
cable length exceeds the 100 meter limit.
● FDX/COL LED
FDX/COL LED shows the transmission mode of port.
When in full-duplex transmission mode, FDX/COL LED give a solid green
light when in half-duplex mode, it will be off.
Gigabit Port LEDs ( Port #25, 26)
● Link/Act LED
Link/Act LED giving a solid green light indicates that a data link has been
established between the corresponding port and the device. If the
connection is faulty, it will be off. While the port is transmitting or receiving
data, you will see blinking green light. If you’ve made a connecting but the
Link/Act LED does not light up as expected, you should check whether the
RJ-45 connectors are damaged, or the cable type or pin-out is not correct,
or the cable length exceeds the 100 meter limit.
● FDX LED
FDX LED shows a solid green light indicates that the line speed going
through that specific Gigabit port is operating at full duplex mode.
● 100M LED
100M LED showing a solid green light indicates that the line speed going
through that specific100 Mbps port is operating at 100Mbps mode. If the
transmission speed operates only at 10Mbps, it is off.
● 1000M LED
1000M LED showing a solid red light indicates that the line speed going
through that specific Gigabit port is operating at 1000Mbps with a speed up
to 2000Mbps.