Gigafast EE2400-G, Руководство пользователя

Страница: 11 / 30

RJ45 Gigabit port cable requirements:
● 1000BAST-T
100 ohm Category 5 UTP/STP cables.
Straight-through/crossover cabling requirements
Under most conditions, the 24 station ports on the Switch may accept normal,
straight-through cables, i.e., standard UTP/STP cables, which are the only
ones that can be used with a RJ-45 pin layout.
Normally, 10BASE-T networks require a straight-through Cat. 3,4,5 UTP/STP
cabling system. The cabling system could be found in most existing network
installations. 100/1000BASE-T networks require Cat 5 UTP/STP cabling
system.
3-d 10/100BASE-TX pin assignments for RJ-45 connector
Adapter Switch
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
Cable and Connector