Gigafast EE2400-G, Руководство пользователя

Страница: 10 / 30

Adequate space should be allowed in front of all the ports, so that each
port is easily accessible for cable connections.
Cabling Requirements
EtherEngine 2400-G Gigabit Ethernet Switch is primarily designed as a
central switching device to provide congestion-free bandwidth to your existing
10/100/1000Mbps network. It can also provide you with up to 2 gigabit
backbones to relieve your network bottleneck. It fits well into the
10/100/1000BASE-TX cabling architecture to facilitate not only 20/200Mbps,
but also 2000Mbps full-duplex transmission speed. The auto-detecting MDI
Uplink will automatically change the regular port to an uplink port that
provides a switch-to-switch cabling extension up to 100 meters.
The table below describes which types of cable should be used in which
circumstances:
10/100/1000BASE-T connection
The 24 RJ-45 station ports (MDI-X) and the copper-wired gigabit port require
either UTP or STP cable for connection. When configuring within the
10/100/1000BASE-T cabling architecture, the UTP cabling distance should be
within a maximum distance of 100.
RJ-45 station port cable requirements:
● 10BASE-T
100 ohm Category 3, 4 or 5 unshielded or shielded twisted-pair (UTP/STP)
cables.
● 100BASE-TX
100 ohm Category 5 UTP/STP cables.
Connection
Specification
Station Port (10BASE-T/100BASE-TX)+
Copper-wired Gigabit Port 1000BASE-T
Port RJ45 Port
To an end station
Straight-through
Twisted-pair cable
To a hub/switch
Straight-through
Twisted-pair cable
Maximum Distance 100M