Gigabyte H261-NO0 Скачать руководство пользователя

Страница: 2 / 113

- 2 -

Copyright

© 2019 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE without prior

notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any
form or by any means without GIGABYTE's prior written permission.

Documentation Classifications

In order to assist in the use of this product, GIGABYTE provides the following types of documentation:



User Manual: detailed information & steps about the installation, configuration and use this

product (motherboard), covering hardware & BIOS



Service Guide: detailed information & steps about the installation, configuration and use of

this product (server barebones), covering hardware & BIOS



User Guide: information about a particular firmware or software package that can be used

with this product (such as BMC firmware)



Quick Installation Guide: a short guide with visual diagrams that you can reference easily for

installation

purposes

Please see the support section of the online product page to check the current availability of these docu-
ments

For More Information

For related product specifications, the latest firmware and software, and related information, please visit our

website at:

http://www.gigabyte.com
For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our re-
seller portal:

http://reseller.b2b.gigabyte.com

Содержание H261-NO0


















































































































Результаты поиска

Содержание H261-NO0

Отзывы:

Похожие инструкции для H261-NO0

Бренды по названию

Популярные бренды

Gigabyte H261-NO0, Руководство пользователя

Результаты поиска

Содержание H261-NO0

Отзывы:

Похожие инструкции для H261-NO0

Бренды по названию

Популярные бренды