S1200
│
1-3
Then you can find the
reset button. Press it to
reset your phone.
1.2 Battery
Your device comes with a removable and
rechargeable Lithium Polymer battery. The standby
time and talk time will vary depending on the local
network and individual usage.
Open Battery Cover
Push the battery cover upwards, and then, remove it.
Charging the Battery
Please make sure that the battery is installed and
fully charged when use your device for the first time.
You may charge the battery in the following ways:
1.
Universal AC Adapter: Plug your AC adapter into
a suitable main power socket, and plug the
connector to the charging slot of your device. The
phone will start charging automatically.
2.
USB Cable: Connect your device and your PC
with the USB cable supplied in your package.
Power on
Hold down Power Key for a few seconds to turn on
the device.
Power off
Hold down Power Key for a few seconds to turn off
the device.
To reduce the power consumption of your device,
you may change the backlight duration and
brightness level.
Tap Start > Settings > Power > Advanced tab, and
then, select the duration of the backlight. This
function helps you save power.
Battery Power
Tap Start > Settings > Power > Battery tab. The bar
indicates the remaining power of the battery.
Sleep Mode
1.
Sleep Mode is a power-saving mode designed to
reserve the power of the battery. After idling for a
period of time, the device enters Sleep Mode
automatically. You may also manually enter
Sleep mode by pressing Power Key. The
backlight of the screen will turn off and the device
will activate Sleep Mode. When your device is in
Sleep Mode, it will not respond to any operation
or touches on screen and on the keypad.
2.
Press Power Key again to exit Sleep mode.
3.
You may adjust time to activate Sleep Mode. The
device will enter Sleep Mode automatically, when
no operation is done within a period of time.
․
Tap Start > Settings > Power > Advanced tab.
․
Select your desired time period on “On battery
power” or “On external power”.
․
Tap OK to complete this setting.
1.3 SIM Card
Before inserting/removing a SIM card, please make
sure that the device is turned off and is not
connected to any power supply.
1.
Push the battery cover upwards, and then
remove it.
2.
Find the carrier of the SIM card on the upper-right
corner of your phone.
3.
Insert the SIM card into the carrier. The metal
Note:
Using any battery pack or AC adapter
(charger) not specified/endorsed by GSmart
on this phone may be dangerous and may
invalidate any warranty and approval given to
the device. Unplug the charger from the
power supply when it is not in use.
