Gigabyte GA-Z77X-UD4H Скачать руководство пользователя страница 21

Страница: 21 / 120

Hardware Installation

- 21 -

1-7 Back Panel Connectors

•

When removing the cable connected to a back panel connector, first remove the cable from your

device and then remove it from the motherboard.

•

When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent

an electrical short inside the cable connector.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

USB 3.0/2.0 Port

The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification.

Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector. Connect a monitor that supports D-Sub connection

to this port.

DVI-D Port

(Note)

The DVI-D port conforms to the DVI-D specificationand supports a maximum resolution of 1920x1200

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports

DVI-D connection to this port.

Optical S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital optical audio.

Before using this feature, ensure that your audio system provides an optical digital audio in connector.

HDMI Port

HDMI (High-Definition Multimedia Interface) is an all-digital audio/video

interface capable of transmitting uncompressed audio/video signals. The HDMI

port is HDCP compliant and supports Dolby TrueHD and DTS HD Master Audio formats. It also supports

up to 192KHz/24bit 8-channel LPCM audio output. You can use this port to connect your HDMI-

supported audio/video device. The maximum supported resolution is 1920x1200, but the actual

resolutions supported are dependent on the monitor being used.

In Windows 7, select Start>Control Panel>Hardware and

Sound>Sound>Playback, set Intel(R) Display Audio to the default

playback device.

After installing the HDMI device, make sure to set the default sound playback device to HDMI.

(The item name may differ depending on your operating system. The screenshot below is from

Windows 7.)

(Note) The DVI-D port does not support D-Sub connection by

adapter.

Содержание GA-Z77X-UD4H

























































































































Результаты поиска

Содержание GA-Z77X-UD4H

Отзывы:

Похожие инструкции для GA-Z77X-UD4H

Бренды по названию

Популярные бренды

Gigabyte GA-Z77X-UD4H, Руководство пользователя

Результаты поиска

Содержание GA-Z77X-UD4H

Отзывы:

Похожие инструкции для GA-Z77X-UD4H

Бренды по названию

Популярные бренды