Gigabyte GA-Z77X-UD4H Скачать руководство пользователя страница 58

Страница: 58 / 120

BIOS Setup

- 58 -

PCIE Slot Configuration

Specifies the operating bandwidth for the PCIEX4 slot.

Auto

Lets the BIOS automatically configure this setting depending on the expansion

card being installed. All PCIe x1 and PCI slots will become unavailable when a

PCIe x4 expansion card is installed. (Default)

PCIEX4 operates at x1 mode.

PCIEX4 operates at x4 mode.

Force to ESATA or GSATA

Allows you to select whether to use the GSATA 6/7 or eSATA connectors.

Auto

Lets the BIOS automatically configure this setting. If the GSATA 6/7 and eSATA

connectors are connected at the same time, the BIOS will enable the GSATA6/7

connector first. (Default)

Force to ESATA

Enables the eSATA connectors.

Force to GSATA

Enables the GSATA 6 and GSATA 7 connectors.

Intel(R) Smart Connect Technology

ISCT Configuration

Enables or disables Intel Smart Connect Technology. (Default: Disabled)

Marvell ATA Controller Configuration

GSATA Controller (Marvell 88SE9172 Chip, GSATA3 6/7 and eSATA connectors)

Enables or disables RAID for the SATA controllers integrated in the Marvell 88SE9172 chip or configures

the SATA controllers to AHCI mode. The area below displays the current status of the two SATA ports.

IDE Mode

Disables RAID for the SATA controllers and configures the SATA controllers to IDE

mode.

AHCI Mode

Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced

Serial ATA features such as Native Command Queuing and hot plug. (Default)

RAID Mode

Enables RAID for the SATA controllers.

Disabled

Disables this function.

Содержание GA-Z77X-UD4H

























































































































Результаты поиска

Содержание GA-Z77X-UD4H

Отзывы:

Похожие инструкции для GA-Z77X-UD4H

Бренды по названию

Популярные бренды

Gigabyte GA-Z77X-UD4H, Руководство пользователя

Результаты поиска

Содержание GA-Z77X-UD4H

Отзывы:

Похожие инструкции для GA-Z77X-UD4H

Бренды по названию

Популярные бренды