Gigabyte GA-P61-USB3P Скачать руководство пользователя страница 26

Страница: 26 / 100

Hardware Installation

- 26 -

10) F_AUDIO (Front Panel Audio Header)

The front panel audio header supports Intel High Definition audio (HD) and AC'97 audio. You may connect

your chassis front panel audio module to this header. Make sure the wire assignments of the module con-

nector match the pin assignments of the motherboard header. Incorrect connection between the module

connector and the motherboard header will make the device unable to work or even damage it.

The front panel audio header supports HD audio by default. If your chassis provides an AC'97

•

front panel audio module, refer to the instructions on how to activate AC'97 functionality via

the audio software in Chapter 5, "Configuring 2/4/5.1/7.1-Channel Audio."

Audio signals will be present on both of the front and back panel audio connections simultane-

•

ously. If you want to mute the back panel audio (only supported when using an HD front panel

audio module), refer to Chapter 5, "Configuring 2/4/5.1/7.1-Channel Audio."

Some chassis provide a front panel audio module that has separated connectors on each wire

•

instead of a single plug. For information about connecting the front panel audio module that

has different wire assignments, please contact the chassis manufacturer.

11) SPDIF_O (S/PDIF Out Header)

This header supports digital S/PDIF Out and connects a S/PDIF digital audio cable (provided by expan-

sion cards) for digital audio output from your motherboard to certain expansion cards like graphics cards

and sound cards. For example, some graphics cards may require you to use a S/PDIF digital audio cable

for digital audio output from your motherboard to your graphics card if you wish to connect an HDMI

display to the graphics card and have digital audio output from the HDMI display at the same time. For

information about connecting the S/PDIF digital audio cable, carefully read the manual for your expan-

sion card.

For HD Front Panel Audio: For AC'97 Front Panel Audio:

Pin No.

Definition

MIC2_L

GND

MIC2_R

-ACZ_DET

LINE2_R

GND

FAUDIO_JD

No Pin

LINE2_L

GND

Pin No.

Definition

MIC

GND

MIC Power

Line Out (R)

No Pin

Line Out (L)

Pin No.

Definition

SPDIFO

GND

Содержание GA-P61-USB3P





































































































Результаты поиска

Содержание GA-P61-USB3P

Отзывы:

Похожие инструкции для GA-P61-USB3P

Бренды по названию

Популярные бренды

Gigabyte GA-P61-USB3P, Руководство пользователя

Результаты поиска

Содержание GA-P61-USB3P

Отзывы:

Похожие инструкции для GA-P61-USB3P

Бренды по названию

Популярные бренды