Gigabyte G262-IR0 Скачать руководство пользователя страница 74

Страница: 74 / 99

BIOS Setup

- 76 -

Parameter

Description

Hardware PM State Control

Press [Enter] to configure advanced items.

Hardware P-States

– When this item is disabled, the processor hardware chooses a

P-state based on OS Request (Legacy P-States).

– In Native mode, the processor hardware chooses a P-state based

on OS guidance.

– In Out of Band mode, the processor hardware autonomously

chooses a P-state (with no OS guidance).

– Options available: Disable, Native Mode, Out of Band Mode, Native

Mode with No Legacy Support. Default setting is

Native Mode

CPU C State Control

Press [Enter] to configure advanced items.

Enable Monitor MWAIT

– Allows Monitor and MWAIT instructions.

– Options available: Enable, Disable. Default setting is

Disable

CPU C6 Report

– Enable/Disable CPU C6(ACPI C3) report to OS.

– Options available: Disable, Enable, Auto. Default setting is

Disable

Enhanced Halt State (C1E)

– Core C1E auto promotion control. Takes effect after reboot.

– Options available: Enable, Disable. Default setting is

Disable

Package C State Control

Press [Enter] to configure advanced items.

Package C State

–

Configures the state for the C-State package limit.

– Options available: C0/C1 state, C2 state, C6(non Retention) state,

Auto. Default setting is

Auto

CPU - Advanced PM Tuning

Press [Enter] to configure advanced items.

Energy Perf BIAS

– Enters the Energy Perf BIAS submenu.

Power Performance Tuning

• Options available: OS Controls EPB, BIOS Controls EPB,

PECI Controls EPB. Default setting is

OS Controls EPB

Energy_PERF_BIAS_CFG mode

(Note)

• Options available: Performance, Balanced Performance,

Balanced Power, Power. Default setting is

Performance

(Note) This item is configurable when

Power Performance Tuning

is set to

BIOS Controls EPB

Содержание G262-IR0




































































































Результаты поиска

Содержание G262-IR0

Отзывы:

Похожие инструкции для G262-IR0

Бренды по названию

Популярные бренды

Gigabyte G262-IR0, Руководство пользователя

Результаты поиска

Содержание G262-IR0

Отзывы:

Похожие инструкции для G262-IR0

Бренды по названию

Популярные бренды