Gigabyte G262-IR0 Скачать руководство пользователя страница 50

Страница: 50 / 99

BIOS Setup

- 52 -

(Note) Advanced items prompt when this item is defined.

Parameter

Description

Legacy Console Redirection

Legacy Console Redirection
Settings

Press [Enter] to configure advanced items.

Redirection COM Port

– Selects a COM port for Legacy serial redirection.

– Default setting is

COM1

Resolution

– Selects the number of rows and columns used in Console

Redirection for legacy OS support.

– Options available: 80x24, 80x25. Default setting is

80x24

Redirect After POST

– When Bootloader is selected, then Legacy Console Redirection

is disabled before booting to legacy OS. When Always Enable is
selected, then Legacy Console Redirection is enabled for legacy
OS.

– Options available: Always Enable, BootLoader. Default setting is

Always Enable

Serial Port for Out-of-Band
Management / Windows
Emergency Management
Services (EMS) Console
Redirection

(Note)

EMS console redirection allows the user to configure Console Redirection

Settings to support Out-of-Band Serial Port management.
Options available: Enabled, Disabled. Default setting is

Disabled

Serial Port for Out-of-Band
EMS Console Redirection
Settings

Press [Enter] to configure advanced items.

Please note that this item is configurable when Serial Port for Out-of-

Band Management EMS Console Redirection is set to Enabled.

Out-of-Band Mgmt Port

– Microsoft Windows Emergency Management Service (EMS) allows

for remote management of a Windows Server OS through a serial
port.

– Default setting is

COM1

Terminal Type EMS

– Selects a terminal type to be used for console redirection.

– Options available: VT100, VT100+, VT-UTF8, ANSI. Default setting

VT100+

Bits per second EMS

– Selects the transfer rate for console redirection.

– Options available: 9600, 19200, 57600, 115200. Default setting is

115200

Содержание G262-IR0




































































































Результаты поиска

Содержание G262-IR0

Отзывы:

Похожие инструкции для G262-IR0

Бренды по названию

Популярные бренды

Gigabyte G262-IR0, Руководство пользователя

Результаты поиска

Содержание G262-IR0

Отзывы:

Похожие инструкции для G262-IR0

Бренды по названию

Популярные бренды