Gigabyte E251-U70 Скачать руководство пользователя страница 77

Страница: 77 / 111

- 77 -

BIOS Setup

5-3-5

IIO Configuration

Parameter

Description

IIO Configuration

Intel

VT for Directed I/O (VT-d)

Press [Enter] to configure advanced items.

Intel

VT for Directed I/O (VT-d)

– Enable/Disable the Intel VT for Directed I/O (VT-d) support

function by reporting the I/O device assignment to VMM through
DMAR ACPI Tables.

– Options available: Enable/Disable. Default setting is

Enable

ACS Control

– Enable: Programs ACS only to Chipset Pcie Root Ports Bridges.

– Disable: Programs ACS to all PCIe bridges.

– Default setting is

Enable

Interrupt Remapping

– Enable/Disable the interrupt remapping support function.

– Options available: Enable/Disable. Default setting is

Enable

PassThrough DMA

– Enable/Disable the Non-Isoch VT_D Engine PassThrough DMA

support function.

– Options available: Enable/Disable. Default setting is

Enable

ATS

– Enable/Disable Non-Isoch VT_D Engine ATS support.

– Options available: Enable/Disable. Default setting is

Enable

Содержание E251-U70
















































































































Результаты поиска

Содержание E251-U70

Отзывы:

Gigabyte E251-U70, Руководство пользователя, Страница: 77 / 111

Результаты поиска

Содержание E251-U70

Отзывы: