Gigabyte E251-U70 Скачать руководство пользователя страница 76

Страница: 76 / 111

BIOS Setup

- 76 -

Parameter

Description

Interleave NVDIMMs

Controls if NVDIMMs are interleaved together or not.
Options available: Enable/Disable. Default setting is

Disable

Assert ADR on Reset

Enable/Disable Assert ADR on Reset.
Options available: Enable/Disable. Default setting is

Disable

Assert ADR on S5

Enable/Disable Assert ADR on S5.
Options available: Enable/Disable. Default setting is

Disable

Memory Topology

Press [Enter] to view memory topology with DIMM population
information.

Memory Map

Press [Enter] to configure advanced items.

IMC Interleaving

– controls the interleaving between the Integrated Memory

Controllers (IMCs).

– Options available: Auto, 1-way Interleave, 2-way Interleave.

Default setting is

Auto

Memory RAS Configuration

Press [Enter] to configure advanced items.

RAS Type

– Displays the RAS type.

Static Virtual Lockstep Mode

– Enable/Disable the Static Virtual Lockstep mode.

– Options available: Disable/Enable. Default setting is

Disable

Mirror Mode

– Mirror Mode will set entire 1LM/2LM memory in system to be

mirrored, consequently reducing the memory capacity by half.
Enables the Mirror Mode will disable the XPT Prefetch.

– Options available: Disable/Enable Mirror Mode (1LM). Default

setting is

Disable

Memory Rank Sparing

– Enable/Disable Memory Rank Sparing. This feature is only

available on 1LM.

– Options available: Disable/Enable. Default setting is

Disable

Correctable Error Threshold

– Correctable Error Threshold (1-32767) used for sparing, tagging,

and leaky bucket.

– Press the <+> / <-> keys to increase or decrease the desired

values.

SDDC Plus One

– Enable/Disable SDDC Plus One.

– Options available: Disable/Enable. Default setting is

Disable

Содержание E251-U70
















































































































Результаты поиска

Содержание E251-U70

Отзывы:

Gigabyte E251-U70, Руководство пользователя, Страница: 76 / 111

Результаты поиска

Содержание E251-U70

Отзывы: