manualshive.com logo in svg
  • Главная
  • /
  • GIGA
  • /
  • I2FZP
  • /
  • Инструкция по установке, использованию и техническому обслуживанию

GIGA I2FZP, Инструкция по установке, использованию и техническому обслуживанию, Страница: 6 / 16

Поделиться
Скачать
GIGA I2FZP Скачать руководство пользователя страница 6

4 - INSTALLATION INSTRUCTIONS

502_03

- GAS KITCHENS

6

· 16

4.1 Safety rules

• Installation, modifications and maintenance of the appliance

must be carried out by authorised personnel in compliance with
current safety standards. The manufacturer declines all responsi-
bility for failure to comply with these obligations.

•  In compliance with international regulations, when connecting

the appliance to the mains power supply, a device with a mini-
mum aperture of 3 mm between contacts must be fitted
upstream of the appliance, allowing omnipolar disconnection of
the appliance from the mains. Also, a high-sensitivity automatic
differential switch must be installed which protects against direct
or indirect contact with live electrical parts and against current
leakage (maximum current leakage permissible by regulations is
1 mA/kW).

•  Compare technical datas on grey stickers to those written on this

manual and present power supply.

•  Do not bend, crush or damage the cables against sharp corners.

•  Lay the cables so as to avoid contact with extremely hot surfaces.

• Connection to the grid must be carried out with at least a cable

type NYM or H07RN-F.

•  The cable - which is totally sheathed – must be led inside the

appliance through the cable clamp and cable raceway installed
on the appliance.

•  Ventilation system installation can be carried out only by expert

personnel.

•  If the appliance is to be installed near walls, dividing walls, kit-

chen equipment or decorative panelling, these should be in non-
inflammable material. If not, all appliances must be coated with
thermal-insulation fireproof material. Make sure that all fire pre-
vention standards and safety precautions are strictly adhered to.

4.2 Structure, equipment and safety devices
of the unit 

18/10 chrome-nickel steel outer panelling. 

4.2.1 Cooking zone 

•  Burner with stabilized flame.

•  Pilot flame.

•  Gas cocks with safety and adjustable from maximum to minimum.

•  Thermoelectric ignition safety.

• Enamelled cast-iron pan supports.

•  The bodies of the burners, the injector-holder cups and the flame

spreaders are made of nickelled cast-iron.

•  18/10 chrome-nickel steel cooking top.

•  Knobs in thermosetting material.

4.3 Assembly

4.3.1 Installation premises

The appliance should be installed in a well-ventilated room, and if
possible under a range hood (check current regulations).

The appliance can be installed on its own or with other similar
equipment.

If the appliance is to be installed near inflammable walls, a minimum
distance of 150 mm around the sides and back should be allowed. 

If this distance cannot be obtained, take proper heat-protection
action such as fitting tiles or thermal radiation protection material
to the walls.  

Before connecting the appliance to the gas supply, check on the
data plate that the appliance is suitable and type-tested for the
type of gas available. 

If the type of gas indicated on the data plate of the appliance does
not correspond to the gas which is present, refer to the paragraph
"Conversion and adaptation". 

4.3.2 Statutory regulations and technical requirements

During installation of the appliance, the following regulations must
be adhered to:

•  Relevant legal directives;

•  Local building and combustion regulations;

•  "Technical rules for gas systems" worksheet;

•  "Technical rules for liquid gas" worksheet;

•  “Gas installations in industrial kitchens” worksheet;

•  Relative accident prevention standards;

•  Local gas utility regulations.

•  Local building and fire codes.

4.3.3 Installation

Before installation, gas connection, power check, conversion or
adjustment and start up ask for gas supply company advice.

4.3.4 Gas connection

The R 1/2” gas connection of the appliance to the gas pipeline can
either be permanently fixed to the mains or made detachable using
an approved cock.    

After completing gas connection, check for leaks using a special
leak-detector spray.

4.3.5 Smoke extraction

These kitchens are type A appliances, thus no smoke extraction sys-
tem is required.

For the ventilation of the room where the appliance is installed,
refer to related legislation.

4.3.6 Equipotential

The appliance must be hooked up to a unipotential system.  The
required terminal is located near the cord inlet. It is marked by a
tag with a symbol

.

The manufacturers cannot be held responsible for any dama-
ge due to inadequate or incorrect installation or non-com-
pliance with the regulations.

Содержание I2FZP

















Отзывы:

Нет отзывов