041-03 - Gas fryers
11
REPLACING PARTS
All parts must be replaced by authorised technicians
only!
To replace the following parts, remove the control panel
(after unscrewing its fixing screws). It is advisable to
empty the tank.
Gas valve (1 - Fig. 2)
Unscrew the gas pipes and thermocouple. Unscrew the
screws (2). Remove the bulb from the holder on the tank.
The valve may now be removed and replaced with a new
one.
Replace and screw down all parts in the correct order.
Safety thermostat (11 - Fig. 3)
Unscrew the lock nut and the nut fixing the bulb in the
tank, disconnect and insert the new part.
Burner (Fig. 1)
Unscrew nozzle (28) and nut (29). Loosen the screws (26)
fixing the burner to the chamber. Replace the burner.
Thermocouple (38 - Fig. 1)
Unscrew the nipple fixing the thermocouple to the valve,
loosen the 2 screws (25) on the pilot burner and replace
the thermocouple. To simplify the operation (and all those
concerning the pilot burner), screws (31) may be removed
and the pilot burner moved to a more accessible position.
Ignition plug (32 - Fig. 1)
Disconnect the ignition wire, unscrew two fastening
screws (25) and insert a new plug. To simplify the ope-
ration, see the above-mentioned position.
WARNING
Everytime a replacement involving gas input parts is
made, recheck all functions and test for leakage.
A
29
27
33
33
27
28
26
25
32
38
37
30
34
31
1
